Vinyl Plank Flooring
Vinyl Flooring Installation
In Port Alberni.
Luxury vinyl plank installed by Justin Bennett over a properly prepared base, for kitchens, entries, laundry rooms, basements and whole floors. Based in Port Alberni and working across Vancouver Island.
Luxury Vinyl Plank
Hard-Wearing, And Only As Flat As What Is Under It.
Vinyl plank handles moisture better than wood-based products, which is why it comes up so often for kitchens, entries, laundry rooms and basements. It is also thin and flexible, so a dip or a ridge in the subfloor shows straight through it. Most of the work in a good vinyl floor is the preparation underneath.
- Kitchens, entries, laundry rooms, basements and open-plan floors
- Subfloor flattened before the planks go down
- Self-levelling where the base needs more than patching
- Fitted cleanly to walls, doorways and cabinets
- Transitions to carpet, tile and other flooring

How A Vinyl Floor Goes In
Flat First, Then Fast.
- 01
Look at the space
The rooms, the existing flooring, and where the new floor meets carpet, tile or other surfaces.
- 02
Check the subfloor
Vinyl plank needs a flat base. Dips and high spots are checked against what the product’s installation instructions allow.
- 03
Prepare the base
Old flooring removed where it applies, then patching or self-levelling so the floor is within tolerance.
- 04
Lay out and install
End joints staggered and the rows planned so the cuts at the walls are not slivers, then the planks installed room by room.
- 05
Finish the details
Transitions, trim and doorways, then a walkthrough of the finished floor.
Vinyl Plank Floors
A Laundry Room, Rebuilt.

Vinyl plank transition
Common Questions
Vinyl Plank Questions
Is vinyl plank flooring waterproof?
Many vinyl plank products are waterproof as a material, which is a big part of their appeal. The floor as a whole is a different matter: water can still get through the joints and around the edges to the subfloor underneath. Vinyl plank copes with spills and damp far better than laminate or wood, but a flood is still a flood.
Does the subfloor need to be level for vinyl plank?
It needs to be flat, which is not quite the same thing. Vinyl plank follows whatever is underneath it, so dips and ridges show through and can stress the joints. Each product states how much variation it tolerates, and patching or self-levelling brings the floor within that.
Can vinyl plank go over my existing floor?
Sometimes. It can often go over a flat, sound, well-bonded hard floor, but not over carpet, and not over anything cushioned, uneven or loose. The product’s instructions say what it can go over, and the existing floor has to be looked at to know.
Is vinyl plank a good choice for a basement?
Often, yes. It tolerates moisture better than laminate or wood, and it can go over a concrete slab once the slab is flat and its moisture has been checked against the product’s limits.
Can I buy my own vinyl plank?
Yes. It is worth confirming the specific product and quantity before ordering, so the preparation and installation can be planned around it.
Related Work
More From Bennett & Sons.
Hard Surface Flooring
Every kind of hard-surface floor Justin installs, on one page.
Learn moreFloor Levelling & Prep
Self-levelling, patching and subfloor correction, so the finished floor sits flat and lasts.
Learn moreLaminate
A hard-wearing floor at a lower material cost, installed over a flat base and the right underlay.
Learn moreHardwood & Engineered
Solid and engineered hardwood, with the subfloor checked and every transition finished.
Learn more
Also in:TofinoParksville and Qualicum BeachNanaimoCampbell RiverVictoria
Planning A Vinyl Plank Floor?
Send the rooms, the product you are considering and the approximate square footage, and Justin will follow up.

